For the purposes of accelerating adjustment & reform of “One Base, Three Industries” of Anshan city, promoting industry’s optimization and upgrading, giving correct orientation of investment and avoiding blindfold investment and low-level repeat of construction; and according to relevant documents issued by state and province, we have organized and compiled this “Directory Catalog for Industrial Development in Anshan (version for soliciting comments)” (hereafter referred as Directory Catalog). The Directory Catalog covers 10 fields of industries viz. iron & steel, non-ferrous metal, petroleum & chemistry, machinery, building material, light industry, textile, coal, medicine and electricity. In addition, catalog for resource saving and resource comprehensive utilization items is provided. The goals are to promote enterprises to pioneer environment-friendly industries and products which consume less raw material & energy and by which comprehensive utilization of resources is realized; to guide the whole society especially different enterprises have & realize scientific viewpoint of development and go the new road of industrialization thus achieving that sustainable, coordinated and comprehensive development of economy & society is realized.

　　The Directory Catalog concerns two kinds of industries — industries to be encouraged and industries to be restricted or abandoned. The principles of dividing industries into “industries to be encouraged” are: they are now & in the future well required in market and have bright future of development; they are favorable for increasing delivery ability of hard-to-get commodities and favorable for opening home & abroad markets; they have high-tech contents, can promote enterprises to adopt new techniques & technologies thus they are able to make technical progresses and increase their competitive power; they meet requirements of sustainable development strategy, are favorable for saving & comprehensively utilizing resources and for improving ecological environment quality; they are favorable for giving full play to comparative advantage of energy resource, mineral resource and labor resource; they are helpful for increasing employment rate and job posts; and they belong to other cases stated in laws or administrative rules. The principles of dividing industries into “industries to be restricted or abandoned” are: they have overmuch-productivity, and their new projects are helpless for improvement of their industrial structure; they use backward technologies that should be replaced by advanced & proven techniques and technologies; they are unfavorable for saving energy resource and protecting ecological environment; they cause great danger in production and serious environmental pollution; they produce products of very bad quality and consume too much raw material & energy; they belong to other cases stated in laws or administrative rules.

　　It is difficult to involve all the production capabilities, technologies and products of Anshan city’s all industries into Directory Catalog. Those industries belonging neither to “industries to be encouraged” nor to “industries to be restricted or abandoned” and meeting relevant national laws or administrative rules can be seen as “industries allowed”.

　　The Directory Catalog will be dynamically managed and regularly adjusted according to policies issued by state or province.

　　Due to short compile time and lack in experience, it is inevitable that carelessness, incorrectness even mistakes occur in the primary version of Directory Catalog. We expect valuable commends & suggestions from all circles in Anshan for improvement of Directory catalog, so we are able to guide Anshan’s industrial & economic development using correct policies about industries and to accelerate steps of adjustment & reform of old industrial bases.

　　Category 1: Industries to be encouraged
　　I. Iron & steel base
1. Exploration to find out potential reserves of ferrous metal minerals; research & development of key exploration technique
2. Development & application of new technologies for beneficiating poor hematite or magnetite
3. New generation big volume coking oven which is equipped with over 6m high and over 500mm wide carbonizing chamber and devices of coke dry-quenching, coal loading, coke pushing and dust removal
4. Application of coking technologies using tamped coal or proportioned patterned coal
5. Application of technologies of coke dry-quenching and heat exchange by means of heat-conducting oil
6. Oxide pellet production using over 1.2 Mt grate-rotary kiln or straight-line pelletizing machine
7. Production of high- infiltration low-dosage bentonite used for pelletizing
8. Sintering technology to produce high-iron and low-silicon sinter
9. High-temperature long-life hot blast stove
10. Blast furnace using rich-oxygen and coal injection
11. Iron making through direct reduction method with an annual productivity over 150000t
12. Advanced and practicable melting reduction method
13. Treatment of scrap steel (excluding steel making)
14. Slag splashing protection for converter
15. Continuous casting of big alloy steel billet, big slab, round billet, shaped blank and near-completed billet
16. Stainless steel smelting and hot rolling with an annual productivity over 500000t
17. Manufacturing of key parts of modern rolling machine producing hot-rolled wide steel band
18. Manufacturing of important metallurgical-purpose equipment such as mechanical and electrical machineries for mining, pallet of pelletizing machine, cooling wall body for blast furnace, big or middle-sized pig iron ladle, refining devices outside steel making oven
19. Development and manufacturing of mill rolls for rolling of H-shape steel or high quality steel plate
20. Key parts of continuous casting or rolling machine for thin slab
21. Hot-rolled acid-washed steel plate
22. High- strength steel
23. Steel used for high-speed railway
24. Oil well pipe for petroleum exploitation, high-pressure boiler pipe used in power station, pipe for oil or gas long-distance transportation
25. H-shape steel and deformed reinforcing bar with spiral ribs above new III grade
26. Cold continuous-rolled wide steel band
27. Cold-rolled stainless steel plate
28. Cold-rolled silicon steel laminations
29. High-grade plate and shaped steel used for big ships
30. High-quality steels (including plate, pinion steel etc.) used for automobiles (cars)
31. High-temperature alloy
32. Silver-bright material
33. Band made of precision alloy
34. High-strength steel made of micro-alloy, steel made of ultra-fine crystal grain, steel made of ultra-low carbon Bainite
35. Application of plate-form control system
36. Application of technologies to control processes of rolling and cooling
37. Manufacturing of graphite electrode with diameter over 550mm and super-high capacity
38. Manufacturing of large-sized finely porous or ultra finely porous carbon brick used for blast furnace
39. Manufacturing of high-quality composite indefinite-form refractory material
40. Development and application of new technologies related with iron-alloy
41. Hot loading & hot conveying of continuous cast billet
42. Energy-saving technologies applied to metallurgical furnace & kiln
43. Power generating by turbine that combusts only blast furnace gas
44. Heat & power generating by means of combusting only gas
45. Application of thermal storage combustion technology
46. Dry dust removal for blast furnace and pressure difference power generation on top of blast furnace
47. Application of technologies related with converter exhaust fume treatment, gas recovery and briquette making
48. Application of water-saving technologies such as cascade-stage supply of water
49. Application of environment-kindly and resource-comprehensive-utilization technologies related with waste gas, waste slag, industrial dust and wastewater
50. Application of desulfurizing & decyanation technologies treating coke oven gas
51. Establishment of energy management system for metallurgical enterprises
52. Application of metallurgical comprehensive automation technique
53. Application of technologies of informatization & intelligentized control and operation

　　II. Deep-processing enterprises producing mineral products
1. Supersede resources exploration in non-ferrous metal mines, research & development of key technologies of exploration
3. Exploitation of deep & difficult-minable ore body containing hardly-available minerals
4. Pollution-free positive melting process for sulphidic minerals
5. Development of high efficiency extraction equipment and technology
6. Technology of melting in protective atmosphere, electromagnetic casting and electromagnetic stirring
10. Manufacturing of high performance metallic material for track transport
11. Technical development and application of nonferrous metallic compound material
12. High performance and high precision hard metal, deep processing product and ceramic material
13. Rare metal and rear earth metal deep processing and application
15. High performance magnetic material production
16. Super fine material, electronic pulp and products
17. High performance energy new material production
18. Amorphous alloy thin strip production
19. New braking material production
20. High quality magnesium alloy casting and processing technology and development of plate, pipe and section material
21. Advanced surface treatment technology application and development of nonferrous metal (copper, aluminum, titanium, magnesium and hard metal, etc.)
22. High purity metal production and analysis and measuring technology
23. Technological development of process measuring and control of nonferrous metal production
24. Technological development and application of roasting, hot press pre-oxidation and bacteria oxidation amalgamator

　　III. Equipment manufacturing industry
1. New type of large size, medium size and light-duty bus of medium and top grade
2. Road maintenance vehicle
3. Special vehicle, such as special environmental sanitation vehicle, fire fighting wagon, vehicle for work high above the ground
4. Heavy duty dumping truck, heavy duty goods truck, large size tractor
5. Concrete truck mixer and pump station
6. Precise forging, ferrous casting, nonferrous casting and blank manufacturing of important parts of automobiles
7. High performance fire fighting wagon
8. Key parts of automobiles and motorbikes
9. Crank, camshaft and connecting bar of automobile engine
10. Cylinder and cylinder cover of automobile engine
11. Mould processing technology and equipment
12. Production of precise punch die, precise cavity die and standard parts
13. High performance and high quality hydraulic element and hydraulic system
14. Manufacturing of special bearing, car bearing, railway bearing and low noise bearing
15. Software for process analysis, simulation and optimization
16. Design, processing and manufacturing of nonmetallic product mould
17. Package equipment for large scale metallurgical mines
18. Urban waste treatment equipment
19. Large size loose material transportation equipment
20. Large size mixing equipment
21. Minimization, low loss and maintenance free power transformation and transmission equipment for urban and rural power grid
22. DC transformation and transmission equipment for ±500 kV and above
23. Fluidized bed boiler of 135MW and above
24. Environmental protection dedusting technology and equipment for power plant
25. High speed excavator and loader
26. Large capacity crawler crane
27. Thermal wall type road maintenance equipment
28. Concrete handling equipment
29. Slurry seal coat machine
30. Static hydraulic engineering machinery
31. Bridge detecting, road wrecking, comprehensive pavement maintenance machinery
32. Digital, intelligent and network transducer and instrument
33. New instrument element and material production
34. Bar-code equipment and measuring instrument
35. Intelligent high precise steam and natural gas meter
36. New technology and equipment for safe production and environmental protection detecting instrument
37. Special instrument for automobile
38. Urban sewage water treatment equipment with capacity of 250000t/day and above
39. Equipment for making ash and gangue building blocks with annual capacity of 50,000 to 100,000 tons
40. Industrial boiler desulphurization and denitration equipment

　　IV. Light-textile industry
1. Paper pulp, paper and cardboard project conforming to the pattern of forest plantation-papermaking integration and the economic scale
2. Design, processing and manufacturing of nonmetallic product mould
3. Development of biologically degradable plastic and the produce
4.Development and production of plastic water conservation equipment and multi-layer plastic film for agricultural industry
5. High-tech porcelain and high grade household china pottery and porcelain for daily use
6. New type biological (degradable, recoverable and reusable) packing material
7. New type plastic insulation board, large bore plastic pipe and medical new type plastic
8. Development and application of high tech digital printing technology and high definition plate making system
9. Manufacturing of specially needed goods for minority
10. Development and application of raw material and production technology of natural food additives
11. Deep processing and comprehensive utilization of grain, fruit and vegetable, sea food and meat
12. Technical development of industrialization of semiconductor lighting
13. Development and production of serial tourist articles of artistic industry with local characteristics
14. Research, development and production of new type fiber of renewable resource (polylactic acid fiber, solvent method cellulose fiber, animal and plant protein fiber, crust fiber)
15. Production of direct spinning polyester staple fiber with single production line capacity of 50000t per year and above
16. Production and technological development of direct spinning polyester filament with single production line capacity of 20000t per year and above
17. Production and technical development of various compound, superfine, fire resistant, antistatic, chromatophilous and soluble differentiation and functional chemical fiber
18. Hi-tech fiber production of aramid fiber, carbon fiber, high strength and high modulus polyethylene, high modulus low shrinkage polyester industrial yarn and high strength low stretch nylon industrial yarn
19. Production and technical development of high grade chemical fiber textile using differentiation fibers, such as compound superfine fiber, high wet modulus cellulose fiber as raw material
20. High grade textile using natural fiber, such as mulberry tiffany, natural color cotton and fibrilla as raw materials
21. Using new type advanced spinning (including cotton spinning and wool spinning) and weaving technology and equipment to replace and modify the existing backward spinning and weaving equipment in order to upgrade the quality of yarn and fabrics
22. Printing and dying system modification to upgrade the quality of fabric, save energy and reduce pollution
23. Production of famous brand and high grade tatted and knitted dress
24. Special textile materials for high-tech industry, such as framework material, earth work cloth, filtering materials, safety and health protection goods etc.
25. Applying information technology and improving the design level and quality of clothes textile product
26. Developments and utilization of textile cleaning production technology
27.Production of special finishing agent for fixing after printing
28. Production of cold paste and popularizing of wollens, ramie and silk industry
29. Supplementary materials of top grade clothes

　　V. Comprehensive utilization of environment protection and resource saving
1. Zoology and environment regulation
2. Comprehensive development and utilization of forest region resources
3. Comprehensive governing project for small valley
4. Reconstruction & governing for environment of mining production and re-cultivate of land
5. Multiple protection for biology
6. Disposal center of medical waste
7. Treatment center of dangerous waste
8. Disposal center of regional waste vehicles
9. Project of environment monitoring of effluent radiation
10. Environment monitoring system project and development and utilization of new type environment friendly technology
11. Safety and disposal technology for dangerous waste including radioactive substance and development & manufacturing of equipment
12. Control technology for flowing pollution sources (train, vessel and vehicle)
13. Control of urban transportation noise and vibration and production of material
14. Development of electric network and information system electromagnetic radiation
15. Comprehensive utilization and governing project of “three kinds of waste”
16. “Zero” discharging model project of three kinds of waste of industry and development of cleaning production technology
17. Biology fungus and addition agent for three kinds of waste
18. Project of resources regeneration & comprehensive utilization of paper making industry and control project of environment pollution
19. Development project of control technology of industrial waste water of high concentration and difficultly degradation by biology
20. Reclaiming of industrial solvent
21. Making high-concentration organic waste water be resource
22. Control and comprehensive utilization of galvanic liquid waste
23. Handling process of printing and dyeing waste water and manufacturing of complete equipment
24. Development and application of waste water and rejected material of medicine enterprise and medical treatment organization
26. Making etching solution from printing circuit board be resource
27.Mercury recovery technology for mercury-bearing material and complete equipment environment protection & governing project
28. Development of repeated water utilization and manufacturing and application of equipment
29. Development of high-efficient & low energy consumption sewage treatment and regeneration technology and manufacturing of equipment
30. Project of urban sewage treatment and regeneration and utilization and technology equipment
31. Comprehensive utilization technology for sludge generated during urban sewage treatment
32. Technology development of recovery and utilization of dispersed sewage control for residential districts and towns
33. Desulfurization of gas and smoke, recovery of carbon dioxide, recovery and utilization of acid liquor
34. Reduction of urban refuse and other solid waste and comprehensive utilization project
35. Technical development and manufacturing of equipment for collecting, transporting and transferring of waste from cities and towns
36. Comprehensive utilization and pollution control of excrements of domestic animals
37. Recovery and utilization of waste wood-base product
38. Comprehensive utilization of waste rubber
39. Anti seepage film for waste landfill
40. Water treatment agent
41. Film utilization technology, film material and film equipment for sewage treatment
42. Technology of smoke eliminating, desulfurization and denitration, development of equipment, manufacturing of complete equipment
43. Development and utilization of high-efficient middle and small boiler for desulfurization in boiler
44. Technology of noise absorption by wall and development of material
45. High-efficient energy saving technology and product of external wall maintenance architecture
46. Technology and product for heating, heat supply, refrigeration and energy-saving
47. Solar energy, architecture integration, new energy source utilization technology and product
48. Technology of cold accumulation, accumulation of heat, air conditioning and jointly supplying of cold, heat and electricity for building
49. Energy-saving technology of alternating current frequency conversion
50. Oil saving technology for vehicles and diesel locomotives
51. High-efficient industrial boiler and kiln
52. Water-saving, energy-saving and production of environmental friendly product
53. Development and production of water utilization monitoring instrument
54. Technology development and equipment manufacturing of energy-saving, water saving, environment protection and resources comprehensive utilization
55. Comprehensive utilization of waste heat and waste energy
56. Electric power generation of waste heat from new type cement production of daily capacity of 2000 tons and above
57. Recovery and comprehensive utilization of blast furnace, converter and coke oven gas
58. Energy-saving and environment protection and reconstruction of petrol, petrifaction and chemical industry with high-efficient energy consumption and heavy pollution
59. High-efficient, energy-saving, mining, beneficiation technology and development of equipment, manufacturing of complete equipment
60. Comprehensive utilization of multi-element symbiosis mine resources
61. Development and comprehensive utilization of low-grade and complex mine difficult to treat
62. Comprehensive utilization of tailings and waste residues etc.
63. Industrialization of recovery and utilization of renewable resources
64. Deep manufacturing and comprehensive utilization of magnesite and boron rock
65. Comprehensive utilization of waste catalyst
66. Recovery and comprehensive utilization of waste oil products
67. Waste water treatment technology and manufacturing of complete equipment for waste water treatment of textile industry
68. Comprehensive utilization technology and product of fly ash and coal waste rock
69. Deep treatment technology of thick oil and super thick oil
70. Technology of recovery and utilization of carbon dioxide
71. Deep manufacturing of coal tar
72. Recovery and utilization of waste household appliances

　　Category 2. Limiting and Eliminating
　　I. Iron & Steel
1. Bar steel produced by line frequency furnace and intermediate frequency furnace, steel ingot or continuous casting butt and steel product produced with its material
2. 25A hollow steel window material
3. Coking by indigenous method (including modified coke oven)
4. Coke oven with height less than 4.3 m in carbonizer(excluding tamping coke oven)
5. Sintering by indigenous method
6. Hot sinter
7. Sinter machine below 30m2
8. Blast furnace of or below 100m3
9. Line frequency or medium frequency oven producing bar steel, billet or continuous cast billet
10. Converter of or below 15t (excluding converter producing iron-alloy)
11. Electric oven of or below 10t (excluding those for manufacturing of machineries)
12. Steel making through smelting of iron
13. Metallurgical-purpose furnace & kiln, which do not meet relevant standards related with environmental protection
14. Ore-heating electric oven of or below 3200kVA, semi-closed reduction DC oven below 3000kVA, refining electric oven below 3000kVA (excluding those for refining of wolfram-iron and vanadium-iron)
15. Ore-heating electric oven below 5000kVA for producing iron-alloy
16. Kneading & pugging heated by steam, counter-flame roasting oven, AC oven for melting graphite, graphite melting oven below 3340kVA
17. Coking oven with carbonizing chamber of or over 4.3m height equipped with no devices of dry quenching, coal loading, coke pushing and dust removal
18. Sinter machine below 180m2
19. Iron-making blast furnace with effective volume below 1000m3 or blast furnace over 1000m3 which is equipped with no devices of fine coal blowing, dust removing and power generating through waste gas, and by which the energy & fresh water consumptions do not meet relevant standards
20. Steel-making converter with nominal capacity below 100t or converter of or over 100t which is equipped with no devices of waste gas recovering and dust removing, and by which the energy & fresh water consumptions do not meet relevant standards
21. Electric oven with nominal capacity below 60t or electric oven over 60t which is equipped with no waste gas recovering device and by which the energy & fresh water consumptions do not meet relevant standards
22. Hot-rolled band below 800mm (excluding special steel band)
23. Production line with an annual output of or below 250000t of galvanized coiled sheet
24. Production line with an annual output of or below 100000t of coiled sheet
25. Production of chromium-bearing refractory material

　　II. Mechanical new items
1. Manufacturing of ore wagon of or below 3m3
2. Manufacturing of winch with diameter of or below 2.5m
3. Manufacturing of elevator used in mine shaft with diameter of or below 3.5m
4. Manufacturing of ore or rock crusher
5. Manufacturing of screen of or below 40m2
6. Manufacturing of ore grinding machine
7. Manufacturing of ore or coal beneficiating equipment
8. Manufacturing of agitating, thickening and filtering devices (vacuum or pressing types) used for mining or environmental-protection purposes
9. Manufacturing of tractor of or below 50 horsepower
10. Manufacturing of industrial-purpose boiler
11. Manufacturing of common lathe (excluding digital control lathe)
12. Manufacturing of electrically driven machining lathe (including electric spark and wire cutting lathes, excluding digital control lathe)
13. Manufacturing of common plate machining equipment
14. Producing of sinter block or abrasive material made from brown alumina, green carbonized silicon or black carbonized silicon
15. Manufacturing of various composite grindstones with diameter below 400mm
16. Manufacturing of mini-sized common ball bearings

18. New manufacturing project of high, medium and low voltage switchgear
19. New manufacturing project of common electrode
20. New manufacturing project of civil common electric meter
21. New manufacturing project of common low standard fastener below class 8.8
22. New manufacturing project of gas cylinder
23. New manufacturing project of all purpose medium and low carbon steel valve used in water system
24. 100, T100A bulldozer
25. Water gas generating furnace of diameter 1.98m
26. Thermocouple (division number: LL-2, LB-3, EU-2, EA-2, CK)
27. RTD (division number are BA, BA2,C)
28. DDZ-I Series instrument
29. WDH-1E and WDH-2E photoelectric thermometer
30. Model PY5 digital thermometer
31. Model ZL3 X-Y recording meter
32. Series J02 and J03 small asynchronous motor
33. Series JD02 and JD03 pole-changing multi-speed three phase asynchronous motor
34. Series JR0, JR9, JR14, JR15 and JR16 second A, B, C, D thermal relay
35. Model B and BA, single stage, single suction cantilevered centrifugal pump series
36. Model F single stage, single suction corrosion proofing pump series
37. Model GC low pressure boiler feed water pump
38. Model JD long axis deep well pump
39. Model 3W-0.9/7 (ring valve) air compressor
40. 3 tons DC trolley locomotive for underground mine
41. Model BX1-135, BX2-500 AC arc welding machine
42. Model AX1-500, AP-1000 DC arc welding motor generator
43. Series SX box resistance furnace
44. Series SL7-30/10-SL7-1600/10, S7-30/10-S7-1600/10 and S7 distribution transformer
45. Thermal power draining valve of S15H-16, S19-16, S19-16C, S49H-16, S49-16C, S19H-40, S49H-40, S19H-64 and S49H-64
46. High pressure centrifugal fan of series 8-18 and series 9-27

　　III. Building materials
1. Glass and deep processing industry
2. Six body works and below vertical drawn upwards plate glass production line
3. Plate glass common flat drawing technology production line
4. Architectural ceramic brick production line with annual capacity up to 700,000 m2
5. Sanitary ceramics production line with annual capacity up to 200,000 pcs
6. Paperbacked gypsum board production line with annual capacity up to 4,000,000 m2
7. New project and expansion project of cement plant vertical kiln, dry process hollow kiln, lepol system and wet process kiln. New project of new type dry process cement production line with daily capacity up to 2000 tons. New project of cement grinding station with annual capacity of 200,000 tons (the diameter of mill is 2.2m and below)
8. Asphalt paper padded felt production line. Modified asphalt water proofing coiled material production line with annual capacity up to 5,000,000 m2. Bitumen compound felt waterproof coiled material production line with annual capacity up to 1,000,000 rolls. Polyethylene compound waterproof coiled material production lineInorganic and non-metallic material industry
9. Mineral wool production line with annual capacity up to 5000 tons
10. Solid-clay-brick production project and siallite walling material.
11. Aeroconcrete production line with annual capacity up to 100,000 tons
12. Gangue and shale sintered solid brick production line with annual capacity up to 30M tons standard brick
13. Model 400 and below common type brick extruder
14. Model 450 common type brick extruder
15. Model 1000 common type bar cutter
16. Rotary table brick press below 100 tons
17. Hand made wallboard production line
18. Simple mobile concrete block moulding machine, adhesive vibration moulding bench
19. Stationary type concrete block moulding machine with annual capacity up to10,000 m3 under the condition of single shift production
20. Stationary type concrete paving brick moulding machine with annual capacity up to10,000 m3 under the condition of single shift production
21. Hand cutting, non-steaming and pressing curing aereconcrete production line
22. Earthen pot glass fiber drawing production technology and equipment
23. Polythene compound waterproof coiled material, cotton-dacron fibreglass grid (high alkali) compound tire, waterproof polyvinyl chloride coiled material (type S) produced by double heating compound shaping technology
24. Glass-fiber Reinforced Cement (GRC) hollow ribbon board produced by non-alkali resistant fibreglass or non-low-alkaline cement
25. Giobertite composite board for wall or suspended ceiling project
26. 25A hollow steel window
27. Common double glazing plastic door & window, single cavity structural plastic door & window
28. 107 coating
29. Modified starch coating
30. Modified fibre coating
31. Interior decoration coating (including building and carpentry furniture) with content of volatile organic compounds exceeding 200g/l or content of free formaldehyde exceeding 0.1g/kg
32. Interior decoration coating (including building and carpentry furniture) with content of dissolvability metallic lead exceeding 90mg/kg or cadmium exceeds 75mg/kg or chromium exceeding 60mg/kg or mercury exceeding 60mg/kg
33. Interior decoration coating (including building and carpentry furniture) with the content of free isocyanate exceeding 0.7%
34. Polyvinyl alcohol water glass internal wall coating (106 interior wall coating)
35. Multi-color internal wall coating (O/W type coating mainly containing nitro cellulose as resin and dimethyl benzene as dissolvent)
36. Copolymerisation latex of ethylene chloride and meta-ethylene chloride exterior wall coating
37. Tar type polyaminoester waterproof coating
38. Aqueous polyvinyl chloride tar type waterproof coating
39. Polyvinyl alcohol and its aldehyde acetal type interior and exterior wall coating
40. Polyvinyl acetate latex type (containing EVA latex) exterior wall coating
41. Polyvinyl chloride building waterproof jointing material (tar type)
42.S-2 type concrete sleeper

　　IV. Light and textile industry
1. Tannery with annual capacity up to 30,000 sheets (converting into standard cowhide)
2. Soda pop production line with capacity up to 100 bottles per minute
3. Straw pulp paper-making project with annual capacity less than 34,000t, of which the pollution problem of chemical bleaching is not solved
4. Production line of polyvinyl chloride common artificial leather
5. Production line of newly-built bicycle
6. Diplo-aluminium tear-off tin
7. Production line of newly-built glass bottle and pot with annual capacity below 20,000t
8. Production line of sodium tripolyphosphate (including new-built, rebuild and extension project)
9. Open type common lead-acid battery project
10. Production line of new-built spirits
11. Production line of new-built alcohol
12. Production line of chemosynthesis sweetening agent i.e. benzoic sulfimide etc.
13. Production line of model 74 dyeing and finishing project
14. Polyurethane foam product taking CFCs as foaming agent, production technology of polyethylene and polystyrene extruding foam plastics (to be eliminated according to the requirements of National Overall Planning for implementing International Convention)
15. Production technology taking CTC as cleaning agent (to be eliminated according to the requirements of National Overall Planning for implementing International Convention)
16. Production technology taking CFC－113 as cleaning agent (to be eliminated according to the requirements of National Overall Planning for implementing International Convention)
17. Production technology taking TCA as cleaning agent (to be eliminated according to the requirements of National Overall Planning for implementing International Convention)
18. Spinning frame produced before establishment of our country
19. All spinning frame with the head “1”
20. Series of A512, A513 spinning frame produced in 1979 or before 1979
21. Model B581, B582 worsted spinning frame
22. Model BC581, BC582 roving spinning frame
23. Model B591 wool spinning frame
24. Homemade wool spinning spinning frame with service life beyond 20 years
25. Model B601, B601A wool twisting machine
26. Model 1332SD bobbin winder
27. Model BC272, BC272B strip comber
28. Model B701A wool hank reel
29. Model B311C, B311C (CZ), and B311C (DJ) comber
30. Model 1511M－105 loom
31. Model K251, K251A silk loom
32. Model Z114/J jacquard
33. Model GE186 pattern loop machine
34. Model Z261 artificial fur machine
35. Model LMH551 flat-bed printing machine
36. Model LMH571 rotary printing machine
37. Model LMH303, 303B, 304, 304B-160 hot melt dyeing machine
38. Model LMH731-160 hot-air clip stretching Frame
39. Model LMH722M－180, LMH722D－180 short-loop drying type approval
40. Model ZD647, ZD721 automatic silk reeling machine
41. Model D101A automatic silk reeling machine
42. Model ZD681 multiends reeling machine
43. Model DJ561 thin silk fine spinning frame
44. Throwaway expanded plastic tableware
45. Spiral lifting water faucet
46. Production line of ultrathin plastic bag (lower than 0.015mm thick)

　　VI. Items of medicine and chemical industries
1. Raw material of vitamin or its middle products
2. Raw material of penicillin, natrium-fosfomycin and calcium-fosfomycin
3. One-time-use injection device, blood-transfusion device and liquid-transfusion device
4. Medical-purpose butyl rubber plug and liquid-transfusion-purpose glass bottle.
5. Extension of productivity of different agents (especially large liquid-transfusion) using no new medicine & technology (excluding hard capsule filled with liquid)
6. Extension of productivity of products made from in-severe-danger or difficult-available animal or vegetal medicinal materials, which are not widely bred and planted
7. Medical aerosol using fluorinated hydrocarbon as propellant that cannot be replaced by other technologies
8. Rubber condom
9. Intermediate or low frequency pulse electric curing or magnetic treating apparatus & tools
10. Small petroleum refinery of or below 1Mt/a producing gasoline, kerosene or diesel (the year 2005)
11. Acid producing device below 40000t/a using sulfur iron ore as raw material
12. Plant of or below 500000 pieces per year producing bias tire or tire using cotton cloth as framework
13. Plant of or below 10000t/a producing carbon black using dry agglomerating technology
14. Manually filled capsule
15. Medicine sealed by cork and wax
16. Non- autorotation fine drawing, filling and sealing device for ampoule
17. Tower-shape redistillation water installation
18. Drying tank using hot air without waste gas purifying facility
19. Raw medicine production by which national standards related with labor protection and treatment of wastewater, waste gas waste slag are not met
20. Pesticides such as polychlorinated biphenyl, nitrofen, chlordimeform, chlordane, heptachlor, tetramine, fluoroacetamide, sodium fluoroacetate, fumazone, sulfotep, phospham, gliftor, rat killing silicon
21. Aniline or benzidine type azo dye
22. Ointment tube made of lead & tin
23. Ampoule for packing injection powder
24. Medical-use plug made of natural rubber
25. Straight- neck ampoule